Setting The Ipv6 Protocol - Toshiba e-STUDIO 352 User Functions Manual

Setting the IPv6 Protocol

You can set the IPv6 protocol on this equipment.
This IPv6 menu allows you to enable or disable the IPv6 protocol used on this equipment. In this menu,
you can also set the IPv6 configuration such as the IPv6 address by selecting the address mode.
How the IPv6 address is obtained is depending on the address mode you select.
• When you select the manual mode:
You assign the IPv6 address, prefix and default gateway manually. In this mode, you can assign one
IPv6 address to this equipment.
• When you select the auto mode:
This equipment can obtain multiple IPv6 addresses from the DHCPv6 server and routers automatically.
In this mode, up to 9 IPv6 addresses can be registered on this equipment.
Up to 7 IPv6 addresses can be obtained from routers. One IPv6 address can be obtained from the
DHCPv6 server. One link local address is also generated automatically.
1
Press the [NETWORK] button in the ADMIN menu.
• The NETWORK menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
2
Press the [IPv6] button.
• The IPv6 screen is displayed.
P.87
4
111