Toshiba e-STUDIO 352 User Functions Manual page 183

FAX
Function
RTI
*1
ECM
INITIAL SETUP - MONITOR VOLUME
INITIAL SETUP
- COMPLETION TONE VOLUME
INITIAL SETUP - RX MODE
INITIAL SETUP - DIAL TYPE
INITIAL SETUP - DIAL TYPE (LINE2)
*2
LINE-2 MODE
LINE-2 MODE - START
*2
LINE-2 MODE - END
RX PRINT - DISCARD
RX PRINT - REDUCTION
RX PRINT - DUPLEX PRINT
RX PRINT - ROTATE SORT
RECOVERY TX - STORED TIME
FAX RECEIVED FORWARD - AGENT1
FAX RECEIVED FORWARD - AGENT2
*1. These are printed only when the optional Fax unit is installed.
*2. These are printed only when the optional Fax unit and optional Line2 board are installed.
*1
*1
*1
*1
*2
*2
*1
*1
*1
*1
*1
Description
Shows whether the RTI is enabled or dis-
abled.
Shows whether the ECM is enabled or dis-
abled.
Shows the monitor volume setting.
Shows the complete volume setting.
Shows the default RX mode.
Shows the dial type of the line 1.
Shows the dial type of the line2.
Shows the line2 mode.
Shows the start time to use the Line2 for
receptions only. This applies only when "RX
ONLY (TIMER)" is set to the LINE-2 MODE.
Shows the end time to finish using the Line2
for receptions only. This applies only when
"RX ONLY (TIMER)" is set to the LINE-2
MODE.
Shows whether the discard function is
enabled or disabled.
Shows whether the reduction is enabled or
disabled.
Shows whether the duplex print is enabled
or disabled.
Shows whether the rotate sort is enabled or
disabled.
Shows how many hours that a recovery
transmission job is to be stored.
Shows the agent type if the Fax Received
Forward is registered.
Shows the agent type if the Fax Received
Forward is registered.
User
YES
YES
NO
NO
NO
NO
NO
5
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
181