Setting The Fan Mode; Air Flow Adjustment (Where Foreseen) - Carrier Room Controller Owner's Manual

Room Controller
Operation

Setting the fan mode

• Press the " " button.
FAN
The display indicates four possible speed settings:
Low
Medium
High
Automatic
(Fan speed will automatically switch to the
value required for optimum comfort).
When this function is activated, the dotted
symbols will flash.

Air flow adjustment (where foreseen)

• Press and hold the the "
FAN
seconds. The selected louvre setting will be displayed.
• Press the " / " button to change the louvre setting.
UP DOWN
" button for approximately 5
up
down
: Automatic louvre positioning to the best position
AUTO
for the selected operating mode.
: Louvres swing continuously.
SWING
Note: If various units (max. 6) are connected together their air
deflectors must be placed in the same position.
Important
If you do not think that anyone is going to be in the
room for several hours, we advise positioning the
control to the Economy position.
An energy saving will be obtained in this way which
will be translated into an economic saving.
E N G L I S H
GB - 3