1. Manuals
  2. Brands
  3. Cross Technologies Manuals
  4. Power Supply
  5. 2000-02
  6. Instruction manual

Cross Technologies 2000-02 Instruction Manual

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual
•

2000 POWER SUPPLY

C
T
ROSS
ECHNOLOGIES, INC.
POWER
•
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Model 2000-02
Power Supply
January 2010, Rev. C
CAUTION - RISK OF ELECTRICAL
SHOCK - DO NOT OPEN!!!
V1
GND
V2
C
T
ROSS
ECHNOLOGIES, INC.
IF

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2000-02 and is the answer not in the manual?

Questions and answers

Related Manuals for Cross Technologies 2000-02

Summary of Contents for Cross Technologies 2000-02

  • Page 1: Power Supply

    ECHNOLOGIES, INC. Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.
  • Page 2 WARRANTY - The following warranty applies to all Cross Technologies, Inc. products. All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies.
  • Page 3 100-240 ± 10% VAC, 47 to 63 Hz input and can be used with Cross products requiring +18 VDC. The input AC connector is IEC 320 C13 and the DC outputs are on a barrier strip. The 2000-02 can be mounted on an 1 3/4”...
  • Page 4 2.0 Installation 2.1 Mechanical - The 2000-02 is packaged in an aluminum extrusion. The -R option is mounted on a 1 3/4” X 19” panel that can be mounted to a rack using the 4 holes at the ends. See Figure 2.1.
  • Page 5 A 2.0 amp fuse. There is also a The V1 and V2 (+18 VDC) spare 2.0 amp fuse in the box. regulated DC output voltages. FIGURE 2.3 2000-02 Rear Panel Inputs and Outputs 2000-02 Manual, Rev. C Page 5 01/27/10...

  • Page 6: Switching Power Supply

    5. Install four (4) rear panel screws. POWER POWER SWITCHING POWER SUPPLY POWER SUPPLY FUSE Provides the +18 VDC (1.0 A) 2.0 amp fuse regulated DC output voltage FIGURE 2.4 2000-02 On-Card AC Power Supply Fuse 2000-02 Manual, Rev. C Page 6 01/27/10...

  • Page 7: Operation

    5. After the cause of the blown fuse is corrected, replace the open fuse with the 2.0 amp fuse in the front section. 6. Apply 100-240 ± 10% VAC, 47-63 Hz AC power to the 2000-02 and be sure DS1 (green, DC POWER) is on (Figure 2.2).

  • Page 8: Use Information

    F. Top Cover - There are no servicable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE RE-INSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 2000-02 Manual, Rev. C Page 8 01/27/10...
  • Page 9 ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com Printed in USA 2000-02 Manual, Rev. C Page 9 01/27/10...

Table of Contents