Table of Contents
Advertisement
Quick Links
Instruction Manual
C
T
ROSS
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
ECHNOLOGIES, INC.
POWER
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Model 2000-318
SSPB Power Supply
2000 POWER SUPPLY
2000-324
November 2009 Rev 0
Advertisement
Table of Contents
Related Manuals for Cross Technologies 2000-318
Summary of Contents for Cross Technologies 2000-318
- Page 1 POWER Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.
-
Page 2: Table Of Contents
WARRANTY - The following warranty applies to all Cross Technologies, Inc. products. All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies. -
Page 3: General
10 MHz reference signal on the RF line. The input AC connector is IEC 320 C13. The 2000-318/324 can be mounted on an optional 1 3/4” X 19” rack mount panel (option -R). 2000 POWER SUPPLY ROSS ECHNOLOGIES, INC. -
Page 4: Technical Characteristics
1.2 Technical Characteristics TABLE 1.0 2000-318/324 SSPB Power Supply Specifications* RF Input/Output Characteristics Impedance/Return Loss 75 /14 dB Frequency 950 - 2150 MHz Insertion Loss 1 ± 0.5 dB Frequency Response ±1.0 dB AC Input Characteristics Voltage 100-240 ±10% VAC... -
Page 5: Installation
2.0 Installation 2.1 Mechanical The 2000-318/324 is packaged in an aluminum extrusion. The -R option is mounted on a 1 3/4” X 19” panel that can be mounted to a rack using the 4 holes at the ends. REAR SCREWS (4EA) -
Page 6: Rear Panel Inputs & Outputs
2.3 Front Panel Indicators - The following are the front panel indicators. DS2 - POWER LED Lights green when DC power is present 2000 POWER SUPPLY ROSS ECHNOLOGIES, INC. POWER FIGURE 2.3 Front Panel Indicators 2000-318/324 Manual_Rev 0 Page 6 11/23/09... -
Page 7: Operation
2.4 Operation 2.4.1 Installing and Operating the 2000-318/324 SSPB Power Supply 1. Connect an RF signal to RF connector, J2 (Figure 2.2). 2. Connect RF+DC connector, J1, to the external equipment (Figure 2.2). 3. To insert +18 VDC/+24 VDC on the RF signal insert a 1 amp fuse (provided) in fuse holder, F1 (Figure 2.2). -
Page 8: Use Information
G. Top Cover - There are no servicable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE RE-INSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 2000-318/324 Manual_Rev 0 Page 8 11/23/09... -
Page 9: Shiloh Road Alpharetta, Georgia
ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com 2000-318/324 Manual_Rev 0 Page 9 11/23/09...
Need help?
Do you have a question about the 2000-318 and is the answer not in the manual?
Questions and answers