LG PQCSW320A0E Quick Manual page 26

About AC Smart
Automatic switch operation condition setting
<Temperature limit operating
condition setting screen>
items to set the Automatic switch operation.
Item
Temperature setting
Temperature
difference
Temperature
criteria
Apply/Not apply
26
AC Smart
When you press the [Condition setting] button, the
'Condition setting' screen to set the Automatic switch
operation function and related items will be displayed as
shown in the left picture.
Designate the Automatic switch operation group and set
the item for Automatic switch operation, and then press
the [Save] button to set the Automatic switch operation
function to the applicable group.
Refer to the following table for the description on the
Set the criteria temperature to automatically switch the temperature.
Select the temperature difference for Automatic switch operation to
operate. When the difference between the current indoor temperature
and criteria temperature is higher than or lower than this temperature
difference, the operating mode of the indoor unit will automatically
switch.
Select the method to measure the indoor temperature. You can select
one of the three methods to measure the indoor temperature.
- Average all units: Method of operating the Automatic switch
operation function by using the average of the temperature from
indoor units detected within the group
- Average all operating units: Method of operating the Automatic
switch operation function by using the average of the temperature
from operating indoor units within the group
- Fixed: Method of operating the Automatic switch operation function
according to the temperature detected based on the criteria of the
indoor unit registered first within the group
Set whether to execute or not execute the Automatic switch operation.
- Apply: Execute the Automatic switch operation function
- Not apply: Not execute the Automatic switch operation function
Description