Table of Contents
Advertisement
Parameter
Display device
information
Digital zoom
Change show
mode
Local record
Snapshot
Audio
Close video
5.2.2 System Menu
System menu is shown as in Figure 5-7.
Please refer to chapter 5.3 Configuration, chapter 5.4 Search, chapter 5.5 Alarm, chapter 5.6
About, chapter5.7 Log out for detailed information.
5.2.3 Monitor Window Switch
The monitor window switch interface is shown as in Figure 5-8.
System supports 1/4/6/8/9/13/16/20/25/36-window real-time preview.
----It is video quality adjustment button. It has relationship with decode via software.
--Fluency button. You can use this function to adjust the priority between real-time and
fluency.
5.2.4 Preview Window Switch
The preview window switch interface is shown as in Figure 5-9.
NVR series products do not support this function.
Function
1: NVR IP address.
2: Channel number.
3: Bit stream.
4: Bit stream decode type.
S1: Overlay.
S2: Off stream.
S3:GD1
H1: Overlay
H2: off stream decoding from the display card.
Click this button and then left drag the mouse in the zone
to zoom in. Right click mouse system restores original
status.
Resize or switch to full screen mode.
Please initial version does not support this function.
When you click local record button, the system begins
recording. The recorded file is saved to system folder: \
RecordDownload(default).
You can snapshoot important video. All images are
memorized in system folder: \ picture download (default).
Please initial version does not support this function.
Turn on or off audio.
Close video in current window.
Figure 5-7 System Menu
Figure 5-8 Monitor Window Switch
64
Advertisement
Table of Contents
