Rotary Knob - Motorola MW810 Owner's Manual

24
NOTE: All above events wake up the MW810 CPU. Be aware that some laptops or desktops
may not support a specific event. If your display is connected to 3
owner's guide for verification of wake up events.
The CPU can resume from standby by one of the following events:
•
Pressing either the touch panel or the Emergency/Function key or a wake-up event
from USB HID device connected to the display
The parameter specifying that the Operating System should stop being in low power state
when there is USB activity must be set. To enable this feature, Allow this device to bring
the computer out of standby option (Power Management tab in Properties) should be
selected. For details about this option, refer to the help file attached to the Properties of the
device.
Default setting of the operating system allows resume from the touch panel, the rotary knob,
the emergency and function keys.
Pressure of the Power button will bring the computer out of standby if its setting specifies
the operating system to come out of a low power state when you press the Power button.
For details about this option, refer to the help file attached to Power Options (Start
Settings Control Panel
not allow resume from the power button.

Rotary Knob

The multifunctional rotary knob is intended for controlling the display brightness and volume
of sound.
When
ROTARY KNOB CONTROL = ENABLE
•
The rotary knob push activates the on-screen display control.
•
Long rotary knob push (for 3 seconds or more) activates the auto adjustment of the
screen image. Auto adjustment automatically sizes, centers, and tunes the video
signal parameters in order to eliminate image distortions. That's valid only for RGB
video input.
•
Scrolling activates a function which is defined by
parameter
ROTARY KNOB DEFAULT FUNCTION
left or right. Available choices are
selected, scrolling right/left will increase/decrease the brightness level. Shown next
Brightness control pop-up message will accompany that operation.
If is selected, scrolling right/left will increase/decrease the volume of sound. Shown
VOLUME
next Volume control pop-up message will accompany that operation.
6802982C85-C
Power Options). Default setting of the operating system does
, the rotary knob allows push in and scrolling.
parameter defines the rotary knob function when scrolling
BRIGTHNESS, VOLUME,
rd
-party device, refer to its
ROTARY KNOB DEFAULT FUNCTION
and . If
OSD MENU BRIGTHNESS
is