Download Print this page
Ken A Vision T-19541C Instruction Manual

Ken A Vision T-19541C Instruction Manual

Digital comprehensive scope 2

Advertisement

Quick Links

Digital Comprehensive Scope 2
Instruction Manual
T-19541C
T-19641C

Advertisement

loading

Summary of Contents for Ken A Vision T-19541C

  • Page 1 Digital Comprehensive Scope 2 Instruction Manual T-19541C T-19641C...
  • Page 2: Table Of Contents

    Table of Contents Introduction Packing Contents Microscope Set-up Guide Specifications Troubleshooting...
  • Page 3: Introduction

    Introduction Thank you for purchasing the Digital Comprehensive Scope 2. This digital compound microscope series is specifically designed with advanced features of a 3.2 megapixel digital camera, a mechanical stage with spring-loaded stage clips, an Abbe condenser with iris diaphragm, an adjustable light dimmer (rheostat), and high-quality objective lenses that will magnify 40-1000 times.
  • Page 4: Microscope Set-Up Guide

    Microscope Set-up Guide The Digital Comprehensive Scope 2 compound microscope can be set up in a matter of minutes. To get the most out of this amazing tool, follow these step-by-step instructions: After unpacking the box, take the Applied Vision™ software CD and insert it into your computer to install.
  • Page 5 optimal full charge for longer battery-life. This prevents over charging and the user can charge up to eight (8) microscopes at once. Once finished charging, store the power cord in the stow away integrated storage compartment on the back of the microscope. Plug the narrow end of the USB 2.0 cable into the back of the camera body.
  • Page 6: Specifications

    Specifications Product Number T-19541C T-19641C Stand/Frame SC12 Comp 2 Stand with 4 hole nose piece SC12M Comp 2 Mechanical Stage SC12DP Comp 2 4 hole NP w/ upper/lower light Standard Features Charger Storage Compartment Stow and Go Handle™ Green Batter y™...
  • Page 7: Troubleshooting

    Troubleshooting This section provides many useful tips on how to solve common problems while setting up or using the Digital Comprehensive Scope 2 compound microscope: I can’t see an image. I can only see a partial image. • Check to see if the USB plug is in the USB port of the computer with installed Applied Vision™...

This manual is also suitable for:

T-19641c