Installing The Heat Sink Assembly - Dell OptiPlex 7020 Owner's Manual
Small form factor
Hide thumbs
Also See for OptiPlex 7020:
- Owner's manual (54 pages) ,
- Manual book (39 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
4.
Disconnect the fan cable from the system board. Loosen the captive screws, lift the heat sink
assembly and then remove it from the computer.
Installing the Heat Sink Assembly
1.
Place the heat-sink assembly into the chassis.
2.
Tighten the captive screws to secure the heat-sink assembly to the system board.
3.
Connect the fan cable to the system board.
4.
Place the fan shroud on the fan and push to click in place.
5.
Install the cover
6.
Follow the procedures in After Working Inside Your Computer.
27
Hide quick links:
Advertisement
Table of Contents
