Installing The System Board - Dell OptiPlex 7020 Owner's Manual
Small form factor
Hide thumbs
Also See for OptiPlex 7020:
- Owner's manual (54 pages) ,
- Manual book (39 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
5.
Remove the screws that secure the system board to the computer and slide the system board
towards the front of the computer.
6.
Tilt the system board at 45–degrees, and then lift the system board out of the computer.
Installing the System Board
1.
Align the system board to the port connectors on the rear of the chassis and place the system board
in the chassis.
2.
Tighten the screws securing the system board to the chassis.
3.
Tighten the hex screw to the system board.
4.
Connect the cables to the system board.
5.
Install the:
30
Hide quick links:
Advertisement
Table of Contents
