Settings; Voice Function Setting - Geemarc ClearSound BDP400 User Manual

Settings

Voice function setting

Please note: The Voice function setting is set to ON as
default. However, if you do need to reset it in future for
whatever reason, some people may require sighted
assistance when initially setting the voice function.
When the voice function is on, the Caller ID, Phone book,
the settings in the menu, numbers 0-9 in pre-dial mode,
numbers held in the call log, numbers and letters and all
symbols held in the Phone book and a caller's name (if
recorded, see Phonebook Chapter – Storing Name
Recording) will be announced in the loudspeaker.
To turn the voice function setting on, press the "Menu"
button to enter the menu. The display will show the word
"Store". Press either the " " or " " button until you reach
"Setting" on the display and press the "Ok" button. Press
either the " " or " " button until you reach "Voice" on the
display and press the "Ok" button. Press either the " " or
" " button to toggle between "ON" and "OFF" and when
"ON" is selected, press "Ok" button to confirm. Press the
"PB" button to exit and the telephone will begin to
announce each setting it is entering, denoting that the
voice function has been switched on.
16