Auto Input Selection - Sharp LC-60LE925X Operation Manual

Watching TV
H Display information regarding time shift
Channel display
Channel information displays by pressing DISPLAY on the
remote control unit.
Audio (ENG)
Video
Subtitle
>> New information
 The time shift ready icon shows up when READY is
pressed and the TV is recording the programme.
 The status icon shows up depending on what is shown
on the screen.
Counter
The counter displays when you set "On" in "Display the
Time shift memory" (Go to "Setup" s "Option" s "Time
shift setting").
Time shift
Memory used:
 The grey bar shows how much memory is in use.
 This blue point shows how much time has progressed.
 "Full" shows up when the grey bar reaches the right
edge. The TV starts overwriting the previously recorded
data.
NOTE
• You can also call up the information above by pressing
CONTROL on the remote control unit or select "Control
(Time shift)" from "Setup" s "Option" s "Option for view".
STEREO
Off

Auto input selection

You can choose whether or not to switch the input
source automatically when receiving an AQUOS LINK
or an HDMI compatible signal on the TV during time
shift operations.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press b / c / d to select "Option".
3
Press a / b to select "Time shift setting", and
4
then press ENTER.
Press a / b to select "Auto input selection".
5
Press c / d to select the desired item.
6
Selected item
Release time shift when receiving an
AQUOS LINK or a HDMI compatible
Enable
signal. Switch input source
automatically.
Time shift continues to work. The
TV does not switch input source
Disable automatically even when receiving an
AQUOS LINK or a HDMI compatible
signal.
Description
27