Auto Sync Adjustment (Pc Input Mode Only); Fine Sync. Adjustment (Pc Input Mode Only); Auto Sync; H-Position - Sharp LC-42BX5X Operation Manual

Useful adjustment settings
Auto Sync. adjustment (PC input mode
only)
For automatically adjusting the PC image.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "PC Setup", and then
3
press ENTER.
Press a / b to select "Auto Sync.", and then
4
press ENTER.
Press a / b to select "Yes", and then press
5
ENTER.
• Auto Sync. starts.

NOTE

• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (ex. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
Fine Sync. adjustment (PC input mode
only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "PC Setup", and then
3
press ENTER.
Press a / b to select a specifi c adjustment
4
item among "H-Position", "V-Position", "Clock"
and "Phase".
Input Signal

Auto Sync.

H-Position

[90]

V-Position

[60]

Clock

[90]

Phase

[ 8]
Reset
Selected item
H-Position Centres the image by moving it to the left
or right.
V-Position Centres the image by moving it to the up
or down.
Adjusts when the image fl ickers with
Clock
vertical stripes.
Phase Adjusts when characters have low contrast
or when the image fl ickers.
Press c / d to adjust the item to your desired
5
position.
NOTE
• For resetting all adjustment items to factory preset values,
press a / b to select "Reset", and then press ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
+
+
+
+
Description
37