c
In the direction determined in x, fix the camera attachment (accessory) on the mount bracket
using the fixing screws (accessory).
(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})
Direction marker for installation
Fixing screws (accessory)
Note:
• The direction of "TOP" on the camera attachment (accessory) determines the upwards
direction of the image on the PC monitor.
• For ceiling mounting:
Determine the direction that you want images to be displayed upwards on the PC monitor,
and then mount the camera attachment (accessory) with "TOP" facing this direction.
• For wall mounting:
The camera attachment (accessory) shall be mounted with "TOP" facing upward.
IMPORTANT:
• For installations on the wall, to prevent water from accumulating on the surface of the
dehumidifying device (
inside, the dehumidifying device cannot function properly.
v
Pass the cables through the hole for cable running from the ceiling or wall, and then pass the
cables between the camera attachment (accessory) and mount bracket to the outside.
☞
page 12), do not connect it at the upper side. If water remains
Camera attachment (accessory)
23