GigaPan EPIC Pro User Manual page 21

18
GigaPan Pro User Guide
To charge the battery on its
1. To remove the battery from the EPIC Pro , open the battery compartment by flip-
ping the latch counter-clockwise.
2. Plug the connector end of the power cord into the battery and then plug the power
cord into an AC wall socket.
3. Place the battery level in a space that has ample ventilation.
A light on the power cord will blink red until charged. A blinking green light signals
that the battery is now charged and ready to use.
To check the EPIC Pro battery status:
When the battery is low, a low battery icon will flash in the lower right corner of the
EPIC Pro LCD display. When the battery is so low that proper functionality is no
longer possible, a "Please recharge the battery" message will appear.
To check the battery status, press the directional keys until you reach the 'Op-
tions' menu item and press OK. Select the 'Battery Status' menu item and press
OK. If the battery has just been charged, the battery status should read at least
7.4 volts. If the battery is below 7.0 volts, it needs to be charged.
Power cord
Battery
own:
Charger LED light
Battery Latch