Error indications
Test of internal CJC sensor
Checksum test of the configuration in FLASH
Communications test 4501 / 4131
Check that input signal matches input configuration
Check that saved configuration in 4501 matches device
! Error indications in the display flash once per second. The help text explains the error.
1) The error is reset by switching off and then switching on the supply voltage to the device.
Readout at hardware error
Error search
4131V104-UK
Readout
Error cause
CJC sensor defect or tem-
CJ.ER
perature outside range
FL.ER
Error in FLASH
NO.CO
Connection error
IN.ER
1) Error levels on input
TY.ER
Configuration is not 4131
15