Polaris 2013 Ranger EV Owner's Manual For Maintenance And Safety page 30

FEATURES AND CONTROLS
Main Power Connector
NOTICE: Damage to electrical connections and components will occur if they are unplugged before
the main power connector is disconnected. Always disconnect the main power connector
before servicing or unplugging any electrical components.
When disconnected, the main power con-
nector disconnects the battery pack from
all electrical components, with the excep-
tion of the contactor. After servicing the
vehicle, the main power connector should
be the last connection to be made.
The main power connector is located
under the seat on the driver's side of the
controller tray, adjacent to the main line
contactor. To disconnect, unplug the con-
nector.
To disconnect the battery pack from the
vehicle completely, disconnect the main
power connector, then remove the B+ wire
from the battery terminal.
WARNING! Insulate any tools used within the
battery area to prevent sparks or battery
explosion caused by shorting the battery
terminals or wiring. Remove the batteries, or
cover the exposed terminals with an insulating
material.
26
Main Power Connector
Battery Installation
and Wire Lead
Connection
to controller -
to contactor +
B+ wire
Front of vehicle