Preparing Your Keyboard For Pairing; Pairing/Bonding With Your Device - I-Tech Bluetooth Virtual Keyboard User Manual

5) Select the Pocket PC device which matches yours.
6) Select Install Software and follow the onscreen instructions
to install the software onto your Pocket PC device.
Your Virtual Keyboard Driver is now installed on your Pocket PC device.

Preparing your keyboard for pairing

Place the Virtual keyboard on a flat surface and turn it on. The blue LED at
the top should flash at about once a second. This signifies that the Virtual
Keyboard is currently "unpaired" with any device. If this is not the case,
please see "Resetting the keyboard to factory settings" or "Preparing the
keyboard to be paired with a different device" on page19.
Your keyboard is now ready for pairing.

Pairing/Bonding with your device

1) Ensure Bluetooth is turned On.
2) Go to the Bluetooth Manager program.
3) Tap the Bonded Devices .
4) Tap New...
5) Select VKB Keyboard followed by Next.
9