How To Transport The Machine; Machine Set-Up - Clarke FA-8 Operator's Manual

ENGLISH
EN

How to Transport the Machine

Transporting the Machine With Limited Cargo Area:
1. To transport the machine,remove the handle, dust
pipe and bag. Follow steps in figure 1.
2. Lift chassis with transport handles and place in
cargo area.
WARNING: Machine is heavy (95 lbs.). To
avoid injury or damage, grasp
transport handles firmly; use
proper lifting technique.
2. Secure chassis to prevent movement in cargo area.
Place handle and dust pipe in cargo area.
-6-

Machine Set-up

To set up the machine follow the steps called out in
figure 1:
1. Familiarize yourself with the machine. Read all
danger, warning, and caution statements as well
as the Operator's Manual. If operator is unable
to read this manual, have the manual explained
before operating.
2. Install handle (1) and fasten latch (2).
3. Insert control link into notch and slide collar to
pin (3). Raise sanding drum with control lever.
4. Install dust tube (4) into machine and dust bag
(5) onto dust tube..
5. Connect the handle pitgtail (6) to the motor cord
(7). Align ground pin, insert and twist.
Figure 1
®
Clarke American Sanders Operator's Manual (EN) - FA-8