Inspect & Record Parts Information - KVH Industries TracVision HD11 Installation Manual

1
Inspect & Record Parts Information
Before you begin, follow these steps to make sure
you have everything you need to complete the
installation.
a. Unpack the box and ensure it contains
everything shown in Figure 1 and on the
Kitpack Contents Lists.
NOTE: A SmartSwitch Service/System Selector is
required for dual-antenna installations, while it is
optional for single-antenna installations. It is referred
to as the "SmartSwitch" throughout this manual.
TIP: If possible, save the crate and packaging for
future use in case you need to ship the system later.
b. Carefully examine all of the supplied parts to
ensure nothing was damaged in shipment.
c. Record the system serial numbers in the
Installation Worksheet (supplied in the
Customer Welcome Kit) (see Figure 2). Refer
to the Installation Worksheet for serial
number locations.
IMPORTANT!
Keep the Installation Worksheet handy to
help you plan the installation and record
important information needed later for
system setup. To enable activation of the
TracVision HD11's GPRS modem, you will
need to send the completed worksheet to
KVH.
Figure 1 Primary Components
Antenna
Antenna Control Unit (ACU)
T R A C K I N G S A T S
D I R E C T V 9 9 / 1 0 1 / 1 0 3
®
CONTROL UNIT
MENU CHANGE ACCEPT
ANTENNA
POWER
SmartSwitch Service/System Selector (if equipped)
®
POWER 1 2 3
MULTISWITCH OUT
Figure 2 Installation Worksheet
®
TracVision HD11 Installation Worksheet
IMPORTANT! Completed Worksheets Must be Sent to KVH for GPRS Modem Activation!
Complete each page of this installation worksheet to plan and record important information you will need for system
setup. To activate the system's GPRS modem, send the completed worksheet to KVH. Refer to the TracVision HD11
Installation Guide for complete installation instructions.
Please send completed forms to KVH
E-mail: techs@kvh.com Fax: +1 401 845-8152
Installer, Vessel, and Owner Information
Installer and Dealer/Ship Builder Vessel Information
Technician Name Vessel Name
Company Name Vessel IMO
Address1 Date Installed
Address2
Owner Information (if known)
State/Province
Owner Name
Country
Address1
Phone
Address2
E-mail
State/Province
Country
Installer's Notes
Page 1 of 7
54-0829 Rev. A
Radome
Baseplate
Service
Hatch (x2)
EXIT
PORT/A STBD/B
ANTENNA INPUT
Phone
E-mail
3