Honeywell VisionPRO Series User Manual page 14

Overriding schedules: commercial use
Touch or to adjust the temperature.
s t
It will be maintained until the hold time you
set.
• To change the hold time, touch the
Hold Until arrow buttons. This time
can be adjusted up to the maximum
time set by the installer.
Override
• Touch
occupied temperature if a person
uses the room during an unoccupied
period. The new temperature will be
maintained for 1 hour and can be
adjusted up to the maximum time set
by the installer.
The programmed schedule will resume
when the override timer expires. Touch
Cancel Hold
at any time to resume the
program schedule.
69-2761EFS—03
to use a pre-set
12
MCR34169
MCR34106