Special Functions - NAPCO GEMINI-P400 User Manual

A
By pressing followed by the the appropriate key, (do not press simultaneously) these special functions and
features can be enabled:
Easy Arm (when system is disarmed)
The Easy Arm feature allows the system to be armed
pressing followed by
A
arming of the system by someone who is not a regular
system user.
Easy Exit (when system is armed)
This function (if programmed) allows an occupant to leave
the premises without disarming the system. Pressing
followed by while the system is armed will start a 3
0
minute period, during which you can leave through the Exit/
Entry door.
Bell / Battery Test
Pressing followed by
A
siren to sound for 2 seconds. This will also initiate a test of
your battery to make sure it is adequately charged. The
P400 also performs an automatic battery test very 24 hours.
Access Output
If programmed, pressing
activate the Access Output which may be configured to open
a door strike, turn on lighting, or activate some other special
10
. This will allow the easy
0
will cause the bell, or
1
followed by
A 3
feature your installer has provided.
Display System Trouble
Pressing
A
will cause the system to display any current system troubles.
Pressing
E
Chime Mode On / Off
Pressing
A
A
the door chime. Activating this feature will cause any door to
beep the keypad sounder when it is opened.
Program Mode
Pressing
A
Mode", which will allow you to program and erase user codes
(see Programming user codes, page 14)
Keypad Sounder On / Off
Pressing
A
the keypad sounder, depending on its present state. By
deactivating the sounder on a keypad installed in a bedroom,
will
for example, you will only turn off that keypad's sounder. All
other keypads on the system will still sound normally.

Special Functions

followed by when TROUBLE
4
will exit the Display System Trouble Mode.
followed by will activate / deactivate
5
followed by will enable the "Program
8
followed by will deactivate / activate
9
is lit
H