Yealink SIP-T26P Quick User Manual

SIP-T26P IP Phone
Quick User Guide
For detailed information please consult the Star2Star Phone
and Features Guide, available for view/download via the
Star2Star Web Portal at:
https://portal.star2star.com/
Copyright © 2012, Star2Star Communications, LLC. All rights reserved. Star2Star is a registered Trademark of Star2Star Communications.
BASIC FEATURES
1 LCD Screen 9 MUTE Key
2 Power LED 10 Speakerphone Key
3 Line Keys 11 Redial Key
4 Memory Keys 12 CONF Key
5 MESSAGE Key 13 Volume Key
6 HEADSET Key 14 Key Pad
7 HOLD Key 15 Scroll Keys
8 TRAN Key 16 Soft Keys
MAKING A CALL
Using the handset:
1. Pick up the handset.
2. Enter the number, then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, then press the Send soft key.
Using the headset:
1. With the headset connected, press
headset mode.
2. Enter the number, and then press the Send soft key.
Note: During a call you may alternate between headset,
hands-free speakerphone and handset modes by pressing the
Headset key or Speakerphone key or by picking up the
handset. Headset mode requires a headset be connected to
the phone.
ANSWERING A CALL
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
Using the headset:
Press
Note: You may ignore an incoming call by pressing the Reject
soft key.
Page 1 of 2
Star2Star Yealink SIP-T26P Quick User Guide
ENDING A CALL
Using the handset:
Hang up the handset or press the Cancel soft key.
Using the speakerphone:
Press
Using the headset:
Press the Cancel soft key.
REDIAL
Press
to select the desired call, then press
key.
Press
number.
MUTING A CALL
Press
Press
VOLUME ADJUSTMENT
Press
the handset/speakerphone/headset.
Press
volume.
RING TONE
1. Press the Menu soft key when the phone is idle, then select
Settings > Basic Settings > Ring Tones.
to activate the
2. Press
3. Press Save soft key to accept the change.
PUTTING A CALL ON HOLD
Press
If there is only one call on hold, press
soft key.
If there is more than one call on hold, press
select the desired call, then press
key.
TRANSFERING A CALL
There are three ways to transfer a call: Blind Transfer,
Attended Transfer and Semi-Attended Transfer.
or the Cancel soft key.
to enter the Dialed Calls list. Press
or the Send soft
twice when the phone is idle to call the last dialed
to mute the microphone during a call.
again to un-mute the call.
during a call to adjust the receiver volume of
when the phone is idle to adjust the ringer
or to select the desired ring tone.
or the Hold soft key during an active call.
or the Resume
or
or the Resume soft
or
to