Panasonic CQ-VD7003U Operation Instructions Manual page 24

OUTPUT SELECT
Output Selection
REAR MONITOR
(Rear Monitor Set up)
You can have different picture and sound on the front
and rear monitors at the same time.
Preparation: Connect another optional rear monitor.
(e.g. CY-VHD9401U) (a Installation Instruction)
❑ When the Expansion Module (CY-EM100U, option) is
disconnected:
AUTO : same as front monitor
DVD : DVD/VCD/CD/MP3/WMA
AV1 : AV1
AV2 : AV2
Note:
¡This menu can also be opened by touching/pressing
and holding /[MENU].
¡Images are not displayed on the rear monitor in the
DVD changer mode even if
❑ When the Expansion Module (CY-EM100U, option) is
connected:
¡Connection of the Expansion Module (CY-EM100U,
option) provides two additional source buttons.
¡Connection of audio-only source such as SIRIUS satel-
lite radio, iPod, and XM satellite radio to the Expansion
Module (CY-EM100U, option) provides no additional
button.
default:
AUTO
is selected.
AUTO
Note:
¡The screen above shows the case that no device is
connected to the Expansion Module. In such a case,
the additional buttons are displayed gray and not selec-
table.
¡Only single source of audio and video can come out
through the Expansion Module (CY-EM100U, option).
Therefore, if the audio and video from the changer are
played on the front monitor, the audio and video from
the TV cannot be played on the rear monitor at the
same time.
Example:
When a DVD changer and a TV are connected to the
Expansion Module (CY-EM100U, option),
¡ is selectable. However, the setting is not
feasible because the changer is in operation on the
front monitor.
¡To play the TV on the rear monitor, select
for the front monitor, or select a source other than
the Expansion Module.
(Always display background
BACKGROUND CAMERA
camera on the display)
This function allows the background camera view to be
displayed at the all times.
OFF : each mode image is on the display.
ON : background camera view is always on
the display
24
default:
OFF
25
CQ-VD7003U