ESC GeForce6100SM-M User Manual page 50

44
Resume by PCI-E PME (Disabled)
This system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Express card.
You must use an ATX power supply inorder to use this feature. Use this item to do
wake-up action if inserting the PCI Express card.
Resume by PCI PME (Disabled)
This system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem card
or PCI LAN card. You must use an ATX power supply inorder to use this feature. Use
this item to do wake-up action if inserting the PCI card.
Resume by WOM/Ring (Disabled)
An input signal on the serial Ring indicator (RI) line (in other words, and incoming call
on the modem) awakens the system from a soft off state.
Resume By USB (S3)(Disabled)
This item allows users to enable or disable the USB device Walk-up from S3 mode.
Resume By PS2 MS/KB (S3) (Disabled)
These items enable or disable you to allow mouse or keyboard activity to awaken the
system from power saving mode.
Power On By Button (Enabled)
This item enables or diables you to use only the power button to power on the system.
Hot Key Power ON (Ctrl+F1)
Use this item to allocate the hot key to wake up the system.
Power-On by Alarm (Disabled)
This item allows users to enable or disable the alarm to wake up the system. If set to
Enabled, users can specify the specific day of month and the exact time to power up the
system.
Power On After Power Fail (Off)
This item enables your computer to automatically restart or return to its last operating
status.
Press <Esc> to return to the main menu setting page.
Using BIOS