Maintenance; Service Procedures - Innova Digital Multimeter 10MegOhms Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCE

1. No periodic maintenance is required other than the replace-
ment of the battery, the fuse, and visual inspection of the meter.
2. Keep the meter clean and dry. DO NOT use solvent to clean,
use a damp (not wet) cloth and fully dry after cleaning.
3. The only replaceable parts are the 1.5 AAA batteries,
0.315A/250V fuse (see page 10 for battery and fuse
replacement) and the Test Leads (for Test Leads call serv-
ice department).

SERVICE PROCEDURES

The Manufacturer warrants to the original purchaser that this unit
is free of defects in materials and workmanship under normal use
and maintenance for a period of one (1) year from the date of orig-
inal purchase. If the unit fails within the one (1) year period, it will
be repaired or replaced, at the Manufacturer's option, at no
charge, when returned prepaid to the Technical Service Center
with Proof of Purchase. The sales receipt may be used for this pur-
pose. Installation labor is not covered under this warranty.
All replacement parts, whether new or re-manufactured, assume
as their warranty period for only the remaining time of this war-
ranty. This warranty does not apply to damage caused by improp-
er use, accident, abuse, improper voltage, service, fire, flood,
lightning, or other acts of God, or if the product was altered or
repaired by anyone other than the Manufacturer's Technical
Service Center. Consequential and incidental damages are not
recoverable under this warranty. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also
have other rights, which vary from state to state. No portion of
this warranty may be copied or duplicated without the expressed
written permission from the Manufacturer.
Obtaining Warranty Service:
Products requiring service should be returned as follows:
1. Call the Technical Service Center to obtain a Return
Reference Number:
USA & Canada = 1-800-544-4124
Other = 714-241-6805
2. Package the product carefully to prevent shipping damage
3. Include your name, return address, and a day contact phone
4. Enclose a copy of the dated sales receipt
5. Describe the problem
11
E

Advertisement

Table of Contents
loading

Table of Contents