Table of Contents
Advertisement
HSN_RGG_BRGG1100manual_HSN_RGG_BRGG1100manual 9/6/11 9:23 PM Page 9
Assembling Your Electric
Grill /Griddle Stand
The legs and side stand for your tray store easily on the underside of the
large tray. When storing your tray always have the logo side facing
down. There are six legs that come with your stand, four for the large
tray and two for the small. You can use your grill stand with or without
the side tray attached.
1
Remove the side tray from the large tray storage along with all
six legs.
2
Insert four of the legs in the large tray leg receptacle and push firmly
into place
3
Turn the large tray over so that the logo is now facing up. If using the
side tray insert the two legs in the side tray receptacle. Place the end
opposite the side tray into the large tray receptacle as shown in
figure 5. Ensure that the legs and side tray are pushed firmly into
place.
4
Place your grill/griddle on top of the large tray with the temperature
probe side opposite the side tray (see figure 3).
5
If using your grill/griddle outdoors attach the weather shield over
the side handle that holds the temperature probe (see figure 4).
Side Tray
Figure 5
Grill/Griddle Tray
Tray Legs
9
Storing Your Electric
Grill /Griddle Stand
1
2
3
Figure 6
4
5
Care & Cleaning
Before cleaning, be sure to unplug the cord from the outlet. Remove the
power point from the cooking surface. If necessary, wipe the cord with a
damp cloth.
Caution: Do not immerse the cord in water or other liquid. Allow the
appliance to cool completely before cleaning. Do not put hot cooking
surface in cold water.
Be sure to always wash both the grill and griddle surfaces after each use
to remove any grease that may have accumulated. Ensure that the drip
holes on the grill/griddle are completely clear of any food debris or
other matter prior to using. The cooking plate and drip tray can be
placed in the bottom rack of the dishwasher, or washed by hand.
The base, grill stand trays and legs should be hand washed only in warm
soapy water. Dry all components completely when finished. Do not use
scouring pads or harsh cleaners on either the cooking surface or base. If
necessary, use a nylon bristle brush or plastic scrubbing pad. Do not let
the cooking surface or base soak overnight. This could damage the
nonstick coating.
Do not clean this product with a water spray or the like.
10
The underside of your large
stand has graphics showing
where to place each leg
(see figure 6).
Simply place the legs into
each designated spot on the
underside of the stand and
push firmly into place.
The side tray will fit loosely over
the graphic indicated side tray
(see figure 6).
Store your tray with the logo
side facing down.
Store products indoor when not
in use – out of reach of children.
Hide quick links:
Advertisement
Table of Contents
