Page 1
WT475 - INSTRUCTION MANUAL LED ALARM CLOCK WITH TEMPERATURE P. 1...
Page 2
Words in the figure: Figure 1: ENGLISH Front View-Time display TIME ALARM ON Front View-Temperature display INDOOR TEMPERATURE Top View DOWN SNOOZE ALARM UP/DIMMER Back View BATTERY DOOR INSERT 1 x CR2032 BATTERY INSIDE THE BATTERY COMPARTMENT AC/DC ADAPTOR INSERT AC/DC ADAPTOR JACK DC SOCKET P.
Page 3
QUICK SETUP Step 1 Slide open the battery cover at the back of your clock, then insert 1 x CR2032 Lithium battery to the battery compartment. Make sure +/- polarity of the battery are facing in the right directions. Then replace the battery cover. Step 2 Insert the AC/DC adaptor to any 230 AC household outlet.
Page 4
TO DISPLAY INDOOR TEMPERATURE Simply press SNOOZE once, the time display will change to temperature display. Press SNOOZE once to return to time display. Press and hold SNOOZE for 2 seconds, your clock gives a short beep and will display time for 10 seconds and then display temperature for 5 seconds alternately.