Table of Contents
Advertisement
Quick Links
WT 495 - LED Quartz alarm clock
Instructions manual
INSTALLATION
Plug in the AC/DC adaptor to any AC household outlet. Then plug in the DC jack to the back of
your unit.
Peel off the protective label on the front of your LED clock, the clock will display 0:00 and it is ready
to work for you.
BACK-UP BATTERY
1. Slide open the battery cover at the back of your clock.
2. Insert 1 x CR2032 lithium battery into the battery compartment with the + ve polarity facing up.
3. Replace the battery cover.
When AC power is off, the batteries will back the clock to keep track of time and the alarm time.
The LED display is off when only the back-up battery is being used.
Advertisement
Table of Contents
Related Manuals for Technoline WT 495
Summary of Contents for Technoline WT 495
- Page 1 WT 495 - LED Quartz alarm clock Instructions manual INSTALLATION Plug in the AC/DC adaptor to any AC household outlet. Then plug in the DC jack to the back of your unit. Peel off the protective label on the front of your LED clock, the clock will display 0:00 and it is ready to work for you.
- Page 2 TO SET TIME AND ALARM TIME 1. To set time, press and hold TIME, then press HR to set the hours. Then press and hold TIME and press MIN at the same time to set the minutes. 2. To set alarm time, press and hold ALARM, then press HR to set the hours. Then press and hold ALARM and press MIN at the same time to set the minutes TO TURN ON / OFF ALARM Press Zz ●●●...
- Page 3 Ensure batteries are stored away from metal objects as contact may cause a short circuit. • Avoid exposing batteries to extreme temperature or humidity or direct sunlight. • Keep all batteries out of reach from children. They are a choking hazard. •...
Need help?
Do you have a question about the WT 495 and is the answer not in the manual?
Questions and answers