Selection Of Auto Shut Off Mode; Selection Of Auto Backlight Mode - Abcon ProShip Instruction Manual

2. SELECTION OF AUTO SHUT OFF MODE:
Whilst the scale is in Change Function Mode, press the [UNIT] button until A_ON or
A_OFF is shown. Press [ZERO] to choose ON or OFF: selection display ON, this
means auto shut off function active. Press [ZERO] again, the display will show OFF,
this means auto shut off function inactive.
3. SELECTION OF AUTO BACKLIGHT MODE:
Whilst the scale is in Change Function Mode, press the [UNIT] button until the display
will show L_ON (or OFF). press [ZERO] to choose ON or OFF: selection display ON,
this means auto backlight function active, press [ZERO] again, the display will show
OFF, this means auto backlight function is inactive, i.e. shut off backlight function.
Press [ON/OFF] button to exit Change Function Mode.
FUNCTIONS
PROSHIP 7
®