Intercom Operation; Make A Call To Another Handset; While You Are On The Phone; Toggle Between Calls - RCA 2100 Quick Setup Manual

confirm.
3 Select [ON]/[OFF], then press [OK] to confirm.
»» The setting is saved.

Intercom Operation

An intercom call is a call to another handset that shares the same base
station. A conference call involves a conversation among you, another
handset user and the outside callers.

Make a call to another handset

Note
•• If the base station only has 2 registered handsets, press INT to make a call
to another handset.
1 Press INT. The handsets available for intercom are displayed.
2 Select a handset number, then press [OK] to confirm.
»» The selected handset rings.
3 Press on the selected handset.
»» The intercom is established.
to cancel or end the intercom call.
4 Press
Note
•• If the selected handset is occupied in a call, you hear a busy tone.

While you are on the phone

You can go from one handset to another during a call:
1 Press INT.
2 The current caller is put on hold.
3 Select a handset number, then press [OK] to confirm.

Toggle between calls

Press INT to switch between the outside call and the intercom call.

Transfer a call

1 Press INT during a call.
2 Select a handset number, then press [OK] to confirm.
3 Press when the other side answers your call.
»» The call is now transferred to the selected handset.

Make a conference call

A 3-way conference call is a call between you, another handset user and the
outside callers. It requires two handsets to share the same base station.