Download Print this page

Headset Layout; Basic Operation - RCA VISYS 25065RE1 User Manual

Dect 6.0 wireless headset easy clip

Advertisement

HEADSET LAYOUT

HEADSET CHARGE CRADLE

BASIC OPERATION

Pa
t
Note: If the headset was sold together with an RCA base station (in the
same gift box), you may not need to pair your headset to the base.
1. Press and hold the
button together with the volume + button
for 3 seconds. An alternating red and blue light will indicate that the
headset is now in pairing mode and is searching for a base station.
2. From the Base Phone Setting Menu, Press the VOL (- or +) button to scroll
to Add Headset.
3. Press SELECT Soft key. Pairing Please wait... displays to indicate the base
is now in registration mode.
Or press and hold Headset button for 5 seconds until the display shows
"PAIRING PLEASE WAIT...".
4. If the registration is successful, the base shows Pa
5. If the registration fails (i.e. timeout), the base shows
for 2 seconds and emits an error tone.
Note: This wireless headset is only compatible with the RCA 25252, 25212,
25255RE2, 25265RE2 and 25270RE3 base.
Remove headset (only applicable for base)
From the Phone Setting Menu:
1. Press the vol (- or +) button to scroll to Deregistration.
2. Press the SELECT Soft key. The headset will be shown, along with a list of
all registered handsets. Use the vol (- or +) button to scroll to Headset.
3. Press the SELECT Soft key. The screen displays Remove headset?.
Yes
4. Press
Visual Indicators
Charge Indicator on the Headset
While charging, the LED on the headset will glow blue
Ring Indicator on Headset
the wireless headset.
Making a Call
1. Press the Talk on/O button on the headset OR the headset button on the
base to get a dial tone.
Headset button on the
base
to hang up.
NOTE: If the privacy feature is turned on by pressing the Privacy button on
base, the call cannot be joined by another user.
Answering a Call
1. When the phone rings, press the
press the headset button on the base to answer the call.
Headset button on the base to hang up.
complete for 2
Pairing Failed
button on the headset OR the
button on the headset OR
button on the headset OR the

Advertisement

loading