Frequently asked questions
The signal icon blinks on the screen
• The handset is out of range. Move it closer to the base station.
• If the handset displays [UNREGISTERED], register the handset.
Tip
• For more information, see "Registration" on the advanced settings section.
If I fail to register the additional handsets to the base station, what do I do?
Your base memory is full. Un-register the unused handsets and try again.
No dialing tone
• Check your phone connections.
• The handset is out of range. Move it closer to the base station.
No docking tone
• The handset is not placed properly on the base station/charger.
• The charging contacts are dirty.
Disconnect the power supply first and clean the contacts with a damp cloth.
The handset on the charger does not charge.
• Ensure the battery pack is inserted properly.
• Ensure the handset is placed properly on the charger. The battery icon
animates when charging.
• Batteries are defective. Purchase new ones from your dealer.
No display
• Ensure the batteries are charged.
• Ensure there are power and phone connections.
Bad audio (crackles, echo, etc.)
The handset is nearly out of range. Move it closer to the base station.
• The phone receives interference from the nearby electrical appliances.
Move the base station away from them.
• The phone is at a location with thick walls. Move the base away from them.
The handset does not ring.
Ensure the handset ringtone is turned on.
The caller ID does not display.
• The service is not activated. Check with your service provider.
• The caller's information is withheld or unavailable.
When I see [WAITING...] on the screen, what is happening with the phone?
The phone is recalling the memory of the phonebook and call log. Both