5 Configuring the ZyAIR Using the Wizard
The wizard consists of a series of screens to help you configure your ZyAIR for wireless stations to access
your wired LAN. Refer to your User's Guide for more background information.
Click WIZARD SETUP in the main menu to display the first wizard screen shown next.
1.
Use the second wizard screen to set up the wireless LAN.
2.
WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless network. Select either 64-
bit or 128-bit from the WEP Encryption drop-down list box to activate WEP encryption. Select Disable to turn off
WEP data encryption.
Select ASCII or HEX WEP key input method and then follow the on-screen instructions to set up the WEP keys.
Click Next to continue.
The wireless stations and ZyAIR must use the same ESSID, channel ID
and WEP encryption key (if WEP is enabled) for wireless communication.
ZyAIR G-3000 Quick Start Guide
13
System Name is a unique name
to identify the ZyAIR. Enter a
descriptive name.
Enter a Domain Name if your
ISP requires a domain name for
authentication; otherwise leave it
blank. Click Next to continue
ESSID is a unique name to
identify the ZyAIR in the wireless
LAN. Enter a descriptive name.
A channel is the range of radio
frequencies used by IEEE
802.11b and 802.11g wireless
devices.
Click Scan to have the ZyAIR
automatically select a channel.
The selected channel
automatically appears in the
Channel ID field.