Table of Contents
Advertisement
U
s
e
r
M
a
n
u
a
l
U
s
e
r
M
a
n
u
a
l
Reboot the browser and re-login the camera, you will see the surveillance window.
5.1.4 I have forgotten the administrator password
To reset the administrator password, you had better unplug the network cable firstly. After that, press and hold
down the RESET BUTTON about 5 seconds. Releasing the reset button, the password will turn to the factory
default.
Default administrator username/password: admin with blank password
5.1.5 Subnet doesn't match
Check whether your ip camera in the same subnet of your computer. The step is Control Panel -- Network
Connections -- Dbclick Local Area Connections -- Choose General -- Properties.(Figure 4.23/4.24)
Check subnet mask, IP address and gateways. When you set IP address please make sure they are in the
same subnet. Otherwise you can't access camera.
5.1.6 Camera can not record
Camera can not record when I click Record button or I can't change the manually record path
When you use Windows7 or Vista, you may be not able to do manually record or change the record path
because of the security settings of computer.
There are two ways to resolve this problem:
1 Please add the camera as a trusted site to resolve this issue. The steps are
IE browser--Tool--Internet Properties--Security--Trusted sites--Sites--Add
2 Open IE browser, then right click, select "Run as administrator"
Click Add button to install
the plugin .
Figure 6.5
77
Hide quick links:
Advertisement
Table of Contents
