U
s
e
r
M
a
n
u
a
l
U
s
e
r
M
a
n
u
a
l
4.9.3 Patch Installation
Click "Browse" to select the correct patch file, and then click "Install Patch" to install the patch. Do not turn off
the power during it installing. After installing is complete, you will receive a system prompt.
4.9.4 Factory Reset
Click Factory Reset button and all parameters will return to factory settings if selected.
The default administrator username is admin with a blank password.
4.9.5 Reboot
Click Reboot to reboot the camera. This is similar to unplugging the power to the camera.
5 APPENDIX
5.1 Frequently Asked Questions
NOTE
: Any questions you would meet, please check Network connections firstly. Check the working status
revealed by the indicators on the network server, hub, exchange and network card. If abnormal, check the
network connections.
Figure 4.60
Figure 4.61
72