Operating The Control System - Breeze Mate Attic Breeze User Manual

Operating the Control System

The Fan Icon [2] is used to indicate when a selected Attic
Breeze fan is operating. While in automatic control mode,
the MC-10A controller will display the Fan Icon [2] and
make a selected fan operational any time either the current
temperature or humidity are greater than the controller's set
points. Additionally, the Fan Power LED Indicator [14] on
the FC-10A Fan Controller will be illuminated when the
selected fan is operating.
Operation of your Attic Breeze fan may be configured within
the below set point ranges:
Temperature
Humidity
For optimum energy efficiency, Attic Breeze recommends a
temperature set point of 75°F (24°C) and a humidity set
point of 50% for typical attic ventilation applications.
Set point changes and configuration settings will
!
remain in memory when the fan controller shuts
down at night. When enough sunlight is available,
the FC-10A Fan Controller will re-establish
communications and resume operation as normal.
32F° - 122°F (0°C - 50°C)
10% - 90%
-12-