Automatic Control Mode - Breeze Mate Attic Breeze User Manual

Automatic Control Mode

By default, all fans on the Breeze Mate™ control system
network are set to automatic mode off when first installed.
Fans may be configured for automatic mode operation
either individually if needed, or all at the same time using
the network's global update channel.
►
Using the Fan Button [5], select the desired fan
controller to configure for automatic operation. To
configure all installed fan controllers on the network,
select the global update channel "AL".
►
Press the On/Off Button [8] to switch the fan controller
to automatic mode on. When configured for automatic
operation, the MC-10A Remote Interface Controller
will display the Power Indicator Bars [11] to show the
amount of solar power available for fan operation.
►
Likewise, any single fan or all fans on the network may
be manually turned off by simply following the same
procedure above. While in automatic mode off, a fan
controller will continue to update the MC-10A Remote
Interface Controller with temperature and humidity
data, but the fan will not be allowed to operate.
-10-