Table of Contents
Advertisement
Front Panel Connector : FP1
This mother�oard includes one connector for connecting
the front panel switch and LED Indicators.
Hard Disk LED Connector (HDD-LED)
Connect to the chassis front panel IDE indicator LED.
pin connector is directional with +/- sign.
Reset Switch (RESET-SW)
Attach the connector to the Reset switch on the front
panel of the case; the system will restart when the
switch is pressed.
Power LED Connector (PWR-LED)
Connect to the power LED indicator on the front panel
of the chassis. The Power LED indicates the system's
the LED is on. When the system gets into sleep mode
(S1) , the LED is �linking; When the system is in S3/
Power Switch Connector (PWR-SW)
Connect to the power �utton on the front panel of
the chassis. Push this switch allows the system to �e
turned on and off rather than using the power supply
�utton.
COM Connector : COM2
for legacy compati�ility. User must purchase another
nector in the mother�oard.
CIR Connector : CIR
This header supports infrared wireless transmitting and
receiving device.
HDD-LED
RESET-SW
RLSD
SOUT
GND
RTS
-
EMPTY
GND
16
1
+
+
PWR-LED
-
-
PWR-SW
EMPTY
NC
9
FP1
1
SIN
DTR
DSR
CTS
RI
EMPTY
9
1
CIRRX
GND
NC
CIRTX
NC
EMPTY
9
CIR
Advertisement
Table of Contents
