Advertisement
Quick Links
Advertisement
Related Manuals for Converters.TV CPRO-AVR1
Summary of Contents for Converters.TV CPRO-AVR1
- Page 1 Multichannel AV Amplifier ID# 878 Operation Manual...
- Page 2 Introduction The traditionally bulk and large amplifier is transforming into a new era with the newly formed light and full functions design. Instead of taking over a size of small TV’s space this new amplifier only needs the space of a lunch box.
- Page 3 System Requirements Input source equipments such as DVD/Blue-Ray player, Set-Top-Box, VCR, or PS3 with connection cables and output display HD TV/monitor with all side of speakers up to 7.1 Channels. Operation Controls and Functions Front Panel ① Power: Press this button to turn on or set the device to standby mode. ②...
- Page 4 6.7 Video Resolution This LED shows the output video resolution according to the display monitor or TV or the built-in EDID. 6.8 OSD Upper Layer: This LED shows the device’s mode or the upper level of the OSD selection. 6.9 OSD Lower Layer: This LED shows from the upper level to the lower level of the OSD selection but the default will always goes back to the main volume setting.
- Page 5 Remote Control ① Power: Press this key to turn on or set the device to standby mode. ② Mute: Press this key to mute the audio output sound, press it again to turn back the audio sound. ③ HDMI 1~4: Press these keys to select HDMI input source equipments from 1~4.
- Page 6 OSD Chart...
- Page 8 Note: The value is the default setting System Config EDID Setting: The device has built-in EDID allowing source to output signal for display or users may set the EDID to TV to allow the source to read display’s EDID and send the output signal accordingly. Lip Sync: This function allows all output speakers with the same delay.
- Page 9 Speaker Level: This function allows users with add or less each and every speaker’s output level base on main volume sound. Speaker Distance: This function allows users to set each and every speaker’s distance starting from the audience’s position and each meter is about 3ms delay.
-
Page 10: Specifications
Specifications Input ports 4 x HDMI, 1 x Coaxial, 1 x analog 7.1 or Analog Stereo x 4 Output ports 1 x HDMI, 1 x Subwoofer, 1 x Service Jack, 7 x Speaker Jack Support Resolution 480i~1080p 50/60/24, VGA ~WUXGA HDMI Cable IN HDMI Cable OUT HDMI Audio Format... - Page 11 Connection...
Need help?
Do you have a question about the CPRO-AVR1 and is the answer not in the manual?
Questions and answers