Remote Desktop Mobile; Configure The Remote Desktop Display - AT&T Tilt User Manual

170 Getting Connected
Use your device as a Bluetooth modem
You can connect your device to a notebook or desktop computer through
Bluetooth and use the device as a modem for the computer.
Note
For the computer to use the Internet connection of your device, use Wireless
Modem on your device, then set up a wirelss connection between the
computer and your device. For more information, refer to "Using Your Device as
a Modem (Wireless Modem)" section in this chapter.

10.7 Remote Desktop Mobile

Use Remote Desktop Mobile to access your PC remotely from your mobile
device and use all programs which are available on your PC.
Note

Configure the remote desktop display

Before you connect to your remote PC, configure the Remote Desktop Mobile
to optimise the remote PC display on your device.
1. Tap Start > Programs > Remote Desktop Mobile.
2. Tap Options > Display tab.
3.
Do any of the following:
•
•
•
4.
Tap OK.
If your computer does not have built-in Bluetooth capability, you need to
connect and use a Bluetooth adapter or dongle on your computer.
Make sure that you configure the remote PC to allow remote desktop
connections. Refer to your operating system's manual or help file for details.
In Color, select 256 Colors.
Select Full screen to display the remote desktop in full screen.
When using programs which are specifically configured for use with
a mobile device, select Fit remote desktop to screen to fit the
program on the device screen.