Create And Send Mms Messages - AT&T Tilt User Manual

110 Exchanging Messages

Create and send MMS messages

You can compose MMS messages in a combination of slides, where each
slide can consist of a photo, video or audio clip, and/or text.
To compose a picture message
1. Tap Start > Programs > Messaging > Messaging > Messages.
2. Tap Menu > New > Multimedia Message.
3.
When you see the Choose a MMS screen, tap a preset template, or tap
Custom to open a blank MMS message.
Note
4. In To, enter the recipient's phone number or e-mail address directly,
or tap To, Cc, or Bcc to choose a phone number or an e-mail address
from Contacts.
5.
Enter a subject for your message.
6. Tap the Insert icon (
When selecting a photo or video clip, you can:
•
•
•
•
7.
Enter text and insert audio clips by tapping the respective areas. See
"To add text to a picture message" and "To add an audio clip to a
picture message" for details.
8.
To add more slides, tap
steps 5 and 6 to insert a photo/video, text, and audio into each slide
that you added.
If you prefer to always create a blank MMS message, select the Always
choose custom check box.
Tap Menu > View to view it first, then tap Select to insert the
selected photo or video clip into the picture message you are
composing.
Tap to take a photo (optional) and insert it into the picture
message.
Tap to record an MMS video clip (optional) and insert it into
the picture message.
Tap the Exit icon (
message.
) to select and insert a photo or video clip.
) to quit selection and return to the picture
or tap Menu > Slides > Insert Slide. Repeat