Recording On A Tape Manually; Manual Recording - Sony LBT-XGR99AV Operating Instructions Manual

Notes
• You cannot use Tape Select Edit when Program Play
mode has been set. After clearing the entire program,
follow the above procedure.
• You cannot use Tape Select Edit for discs containing
over 20 tracks.
Tips
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• If you select both sides recording and the tape
reaches the end of the front side part-way through a
track, the entire track is recorded again from the
beginning of the reverse side.
GB
16
Recording on a tape
manually

— Manual Recording

You can record just the portions you like from a
CD, tape or radio program on a tape. You can
also record from connected components (see
"Recording audio from a connected component"
on page 30).
1
Load a recordable tape into deck B.
2
Press FUNCTION or TUNER/BAND
repeatedly to select the desired source
to record.
• CD: To record from this system's CD
player.
• TAPE A: To record from this system's
tape deck A.
• TUNER: To record from this system's
tuner.
• GAME: To record from the connected
video game machine to GAME INPUT
AUDIO L/R jacks.
• MD or VIDEO: To record from the
connected optional component to MD
(VIDEO) IN L/R jacks.
• PHONO: To record from the connected
optional component to PHONO IN L/R
jacks.
3
Press z REC.
Deck B stands by for recording.
When you want to record on the reverse
side, press h.
4
Press DIRECTION repeatedly to select
"g" to record on one side. Select
"j" (or "RELAY") to record on both
sides.
5
Press X, then start playing the desired
source to record.
Recording starts.
To stop recording
Press x.
Note
You cannot listen to other sources while recording.