Table of Contents
Advertisement
Notes
• Be sure to match the color of the plugs and the
connectors.
• See “Selecting the audio emphasis effect” on page 18
for video game sound effects.
• If you press GAME in the left corner of the front
panel while the system is off, the system turns on, the
function switches to GAME, and the equalizer also
switches to the GAME.
• If you press GAME in the left corner of the front
panel while the system is on, the function switches to
GAME and the equalizer automatically switches to
the GAME in the same manner.
• Using a turntable at high volume may cause
distortion or howling. This is often caused by the
bass sound from the speakers. The bass sound may
produce the distortion or howling. To avoid this, do
the following:
– Keep some distance from speakers to the turntable.
– Stop using the surround effect.
– Install the speakers or the turntable on a firm and
stable surface.
Tip
You can enjoy 5.1 channel surround sound while
playing a DVD (page 30).
Listening to audio from a
connected component
Listening to an MD deck or
VCR, etc.
1
Connect the audio cords.
See “Hooking up optional components” on
page 27.
2
Press FUNCTION repeatedly until “MD”
or “VIDEO” appears.
Start playing the connected component.
Notes
• Holding down FUNCTION, and then pressing ?/1
while the power is off automatically turns the power
on and selects “VIDEO” as the function. When the
system is in Power Saving Mode, this function does
not work.
• If the sound is distorted or too loud when “VIDEO”
is selected or you want to switch back to “MD,”
repeat the operation described above to switch to
“MD”.
Listening to a turntable, etc.
1
Connect the audio cords.
See “Hooking up optional components” on
page 27.
2
Press FUNCTION repeatedly until
“PHONO” appears.
Start playing the connected component.
continued
GB
Page 29
Hide quick links:
Advertisement
Table of Contents
