Miele Freezer Operating And Installation Instructions page 11

~
The more coolant there is in an appliance, the larger the room it
should be installed in. In the event of a leakage, if the appliance is in
a small room, there is the danger of combustible gases building up.
For every 8 g of coolant at least 1 m
amount of coolant in the appliance is stated on the data plate inside
the appliance.
~
To avoid the risk of damage to the appliance, make sure that the
connection data (fuse rating, frequency and voltage) on the data
plate corresponds to the household supply.
Check that this is the case before connecting the appliance. Consult
a qualified electrician if in any doubt.
~
The electrical safety of this appliance can only be guaranteed
when it is correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt, please have the electrical
installation tested by a qualified electrician.
~
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
~
Do not connect the appliance to the mains electrical supply by an
extension lead or a multi-socket adapter. These are a fire hazard
and do not guarantee the required safety of the appliance.
~
Do not use in a damp or wet environment (e.g. garage or utility
room). Moisture could reach live components or the electrical
connection and cause a short circuit.
~
This appliance must not be used in a non-stationary location (e.g.
on a ship).
Warning and Safety instructions
3
of room space is required. The
11