TRENDnet TEW-648UBM Quick Installation Manual page 7

3. Windows is unable to recognize my hardware. What should I do?
1. Make sure your computer meets the minimum requirements as
specified in Section 1 of this quick installation guide.
2. You must complete the installation of the Wireless Configuration Utility
(as described in Section 2) before connecting the Wireless USB
Adapter to your computer.
3. Connect the Wireless USB Adapter to a different USB port on your
computer.
4. I cannot open the Wireless Configuration Utility. What should I do?
Access your device manager to make sure the adapter is installed
properly.
1. To access the device manager on Windows 7, click on the Windows
icon on the bottom left-hand corner, click Computer, click System
Properties and then click Device Manager.
2. To access the device manager on Windows Vista, right-click Computer,
click Properties and then click Device Manager.
3. To access the device manager on Windows XP, right-click My
Computer, click Properties, click the Hardware tab, and then click
Device Manager.
If you see a networking device with a yellow question mark or
exclamation point:
1. Uninstall the device from device manager
2. Remove the adapter from the computer
3. Click the Windows / Start icon, click All Programs, click TRENDnet,
click TEW-648UBM and then click Uninstall.
4. Reinstall the adapter. See Section 2. How to Install.
If you still encounter problems or have any questions regarding the
TEW-648UBM, please refer to the User's Guide included on the Utility &
User's Guide CD-ROM or contact TRENDnet's Technical Support Department.
6