Controller Keyboard Configuration - Nuvico EasyTrack CK-1000 Instruction Manual

3.2 Controller Keyboard Configuration

If the user needs to setup the network, change passwords, or perform special tasks such as Uploading
and Downloading programmed data from the dome cameras, hold down
(Shift + Menu.) You will see the following menu. Joystick Up/Down scrolls menu items, turn the joystick
to Right to enter the sub-menu.
MAIN MENU
(
MASTER MENU
Configuration
Port
Camera
DVR
Time/Date
Alarm
Alias Preset
Schedule
Data
Slave Control SetUp
LCD
Exit
CONFIGURATION
Key Beep : ON / OFF
Key Lock : NO / 1Min ~30Min
Chg User Password
Chg Admin Password
Factory Default
Save and Exit
- Key Beep: ON - Enable key beep sound
OFF - Disable beep sound.
- Key Lock: 1Min ~ 30Min - After elapsed setup time, keyboard locks automatically.
NO - Disable Auto Key-Lock function.
User needs the login password to operate the Keyboard again.
- User Password: Simple operation (changing setup and programming disabled)
Password: Enter current user's password.
New Password: Enter 1~6 digits new password.
Confirm Password: Confirm 1~6 digits new password.
- Admin Password: Fully accessible menu (changing setup and programming enabled)
Password: Enter current admin password.
New Password: Enter 1~6 digits for new password.
Confirm Password: Confirm 1~6 digits for new password.
Note: Factory default Administrator's password is 9999+Enter and user password is 1111+Enter.
= Shft + Menu )
+
Master Controller mode
(Shft + Menu ÎCONFIGURATION)
key, and then press
SLAVE MENU
Configuration
Networks
Time/Date
LCD
Exit
Slave Controller Mode (S8 ON)
Key Beep
Alarm Beep : ON / OFF
Key Lock : NO / 1Min ~30Min
Chg User Password
Chg Admin Password
Factory Default
Save and Exit
Slave Controller Mode (S8 ON)
CONTROLLER KEYBOARD
key
: ON / OFF
18