Heater Assembly - Paramount Fitness PH05-S Assembly And Operation Instructions Manual

Tools Required:
1 Phillips head screwdriver, 1 adjustable spanner
1. Remove the protective paperboard off the
top of glass tube
Assemble the reflector into the frame parts
using two-side bolts, then use the nuts to
firm the top.
3. Inner regulator is stored inside. Pl connect
the regulator with 1 pound gas cylinder
tightly.(Cylinder is not provided)
INJECTOR

HEATER ASSEMBLY

2. Using wing nuts to firm the reflector
completely.
4. Assembling is completed. Start to operate
by reading the following operation manual
- 9 -