Unit Control Panel
Fan speed
operation display
Remote signal
receiving window
Indicators
auto
Auto operation display
Cooling operation display
Dry operation display
Heating operation display
Fan operation display
Operation buttons
1
MODE button: Press this button to select the appropriate operating mode. Each time the
button is pressed, the operation mode is shifted in the direction of the arrow:
AUTO
Mode indicators illuminates under the different mode settings.
auto
Auto: Automatically choose the operation mode by sensing the difference between the actual
ambient room temperature and the set temperature. The fan speed is automatically controlled.
Cool: Enables you to enjoy the cooling effect at you preferred setting temperature (Temperature
O
setting range:17 C~30 C).
Dry: Enables you to set the desired temperature at low fan speed which provides you with the
dehumidifying surroundings (Temperature range:17 C~30 C). In Dry mode, you can not select
Fan speed and Sleep mode.
Heat: Permits heating operation(For cooling & heating models only) (Temperature setting
O
O
range:17 C~30 C)
Fan only: Permits fan operation without cooling or heating effect. In this case, however, the
setting temperature is not displayed and you can not adjust the set temperature.
Room Temp/Set Temp
/Set Timer display
auto
7
COOL
DRY
HEAT
O
OPERATING INSTRUCTIONS
TIMER ON TIMER OFF
T1 T2 T3
T4
$
MODE
6
1
Horizontal airflow display
S
Sleep operation display
Electrical heating operation display
On timer operation display
TIMER ON
Off timer operation display
TIMER OFF
Lock operation display
(for cooling & heating models only)
O
O
7
4
TEST RUN
5
LOCK
3
2
FAN ONLY